<img src="https://pubads.g.doubleclick.net/activity;dc_iu=/2328/DFPAudiencePixel;dc_seg=20133850;ord=1?" width=1 height=1 border=0/>

Find a product for your tractor

ECO-Twin PTO
ECO-Twin PTOq
Electronic Frontlift Control
Electronic Frontlift Controlq
Easy Float
Easy Floatq

ECO-Twin PTO

ECO-Twin PTO

The ECO-TWIN PTO was designed based on the knowledge that current tractors can supply the same power even at a lower rpm. That is why this front PTO has the option to switch between ‘normal transmission’ and ‘eco-transmission’ from the cabin, allowing the engine speed to be reduced to approximately 1600 rpm.

With the ECO-TWIN front PTO, you now have a choice between two speeds for the PTO:
- 1000E rpm saves up to 20% in fuel
- 1000 rpm provides maximum engine power


Benefits
- Fuel savings of up to 20%
- Choice between 1000 and 1000E rpm
- Reduced noise levels

Independent research has shown that the switchable ECO-Twin PTO saves up to 20% in fuel.*
(*) The test results have been taken from research carried out by PPP-Agro Advies in collaboration with Wageningen UR Livestock Research (University & Research centre). The study showed that with the ECO-TWIN PTO, a minimum of 10%, up to a possible 20%, of fuel can be saved when compared to a front PTO with a ‘normal’ transmission of 1000 rpm

Electronic Frontlift Control

Electronic Frontlift Control

The Electronic Frontlift Control (EFC) is available as an expansion to Zuidberg front linkages and offers a large number of additional functions. With the electronic control module you can set any desired value, making the control of your front linkage and front PTO more efficient, more comfortable and safer. Zuidberg’s EFC can be used on tractors with both electrical and mechanical valves.

The smart functionalities of the EFC:
- Adjustable lifting and lowering speeds
- Adjustable height and depth limiters
- Adjustable automatic switching of the front PTO
- Hotkeys for lifting and lowering

Easy Float

Easy Float

The Easy Float is available as an expansion to Zuidberg front linkages and offers a sliding-scale pressure relief. The module guarantees perfect ground following and reduced ground pressure from the equipment in the front linkage. The reduced ground pressure prevents wear of the equipment and saves fuel due to the lower friction. Using the Easy Float on your Zuidberg front linkage allows you to achieve better results and reduce machine costs. The Easy Float can be used on tractors with both electrical and mechanical valves.

The smart functionalities of the Easy Float:
- Sliding-scale pressure relief, can be manually adjusted outside the tractor’s cabin
- Automatic pressure monitoring with adjustment available
- Can be (de)activated from the cabin

Accumulator and Pressure gauge
Accumulator and Pressure gaugeq
Weight Carrier
Weight Carrierq
Universal Lamp Set
Universal Lamp Setq

Accumulator and Pressure gauge

Accumulator and Pressure gauge

The Accumulator and Pressure Meter is available as an expansion to Zuidberg front linkages and offers additional protection to the tractor, equipment and front linkage. The Accumulator absorbs peak loads, resulting in increased comfort levels and a prolonged service life of the tractor and equipment. In addition, the throttle developed in-house prevents the tractor’s jumpy behaviour during transport. With a combined Accumulator and Pressure Meter, a piece of equipment can be experimentally loaded or unloaded.
 
Smart features of the Accumulator
- Protects the tractor, equipment and front linkage against large peak loads
- Prevents jumpy road behaviour
- Optimum driving comfort
- Equipment loading and unloading possible

Weight Carrier

Weight Carrier

The three-point weight carrier is specially developed for mounting the basic weight of the tractor, which is removed when mounting the front linkage. The weight carrier is tractor-specific and, depending on the tractor type, the weight to be added to the weight carrier varies between 700 and 1600 kg.

Smart features of the Weight Carrier
- Tractor-specific design
- Weight to be added from 700 to 1600 kg
- Three-point absorption for the tractor’s basic weight

Universal Lamp Set

Universal Lamp Set

The universal lamp set is available as an expansion when using a Zuidberg front linkage and offers a solution if the equipment in the front linkage obstructs the headlights. Use of the universal lamp set improves your view and visibility.

The set is available in the following two versions:
- Universal lamp set for mounting to front linkage
- Universal lamp set for mounting to cabin

Front Remote Control
Front Remote Controlq
Position limitation kit
Position limitation kitq
DIN Mounting plate
DIN Mounting plateq

Front Remote Control

Front Remote Control

The front control system has been developed based on the experience that it may be desirable to operate the front linkage outside the cabin, e.g. while hooking up and disconnecting equipment. These front control systems have a tractor-specific design and come with various features. It is therefore important to always ask your dealer about the possibilities for your tractor.

Front control systems in various versions and sizes:

  • For controlling the front linkage outside the cabin
  • For controlling the front linkage outside the cabin with a height limiter
  • For controlling the front linkage outside the cabin with adjustable lifting and lowering speeds
  • For controlling additional hydraulic functions outside the cabin

Frontbediening.png

Position limitation kit

Position limiter set

The position limiter set is available as an expansion to Zuidberg front linkages and offers an adjustable height or depth limiter, depending on the mounting method of the valve on the multi-valve. Use of the position limiter set results in increased ease of working and eliminates the adverse impact of unacceptably high or low positions of the front linkage.

Smart features of the position limiter set:

  • Can be mounted as a height limiter or depth limiter, depending on the mounting method of the valve on the multi-valve
  • The valve can be mounted directly onto the multi-valve already present
  • Position limit can be set on lifting frame
  • Can be used on all Zuidberg front linkage systems that have a cast-iron lifting frame
  • System can be activated using a switch mounted in the cabin

DIN Mounting plate

DIN Mounting plate

The DIN plate and connection set is available as an expansion to Zuidberg front linkages and offers rapid adjustment of a front linkage to a short mounted DIN plate. The short mounting directly to the lifting frame provides increased stability and a solid construction. In addition, the space for the PTO maintains the option to drive equipment and, due to its use in the front linkage, a lifting mechanism on the equipment itself is no longer required. The Zuidberg DIN plate is constructed in accordance with the French standard and DIN standard, and fits almost all Zuidberg front linkages that have a cast-iron lifting frame.

Various versions are available:
- Communal plate, French standard
- Communal plate, Scandinavian
- Communal plate, CAT A/B/F1/F2
- Communal plate, CAT F2
- Connection set for front linkages of 13 to 50 kN 

Kom_Platte.jpg
7-pole connector
7-pole connectorq
Chain Hangers
Chain Hangersq
Tractor "A-frame"
Tractor "A-frame"q

7-pole connector

7-pole connector

The 7-pole connector is available as an expansion to Zuidberg front linkages and offers the possibility to electrically connect the tractor and equipment. The set is supplied complete for mounting to the front of the front linkage. It can be installed in various ways and locations, however, most Zuidberg front linkages are predesigned for this to simplify the installation.

Among other things, the 7-pole connector can supply electricity to:
- Lighting
- Indicators
- Number plate holder
- Electrical components on equipment
- Sensors for precision farming purposes

IMG_4370.jpg

Chain Hangers

Chain Hangers

The chain hook set is available as an expansion to Zuidberg front linkages and holds chains or springs that are used to reduce the load on front equipment. The chain hooks offer various options for attaching the chains or springs and are mounted at the right height and width to optimise the load reduction on the equipment.

The chain hook set may include the following smart features:
- Design matching the tractor, bonnet or front linkage
- Easy access of lubrication points is maintained
- Uninterrupted beams of the headlights are retained
- Extra high chain hooks for tractors that are frequently used on hilly terrain

Chain Hangers

Tractor "A-frame"

Tractor "A-frame"

The tractor "A-frame" is available as an expansion to Zuidberg front linkages and serves as a quick-coupling system for quickly and easily hooking up equipment. The number of steps to be completed is drastically reduced, shortening the time required for hooking up the equipment and leaving more time for other tasks. The tractor "A-frame", which has a maximum permissible weight of 1400 kg, is highly recommended for equipment that needs to be frequently hooked up and disconnected.

Front double acting services lines
Front double acting services linesq
Lowering Speed Control Set
Lowering Speed Control Setq

Front double acting services lines

Front double acting services lines

The front hydraulic system is available as an expansion to Zuidberg front linkages and offers the possibility to hydraulically operate equipment. A Zuidberg front linkage is often predesigned for mounting one or more front hydraulics sets for optimum integration in the top plate.

Customised front hydraulics:
- Hydraulic hoses at the correct length
- Banjo eye and nipple connection for easy mounting
- Quick release with dust cover
- Supplied ready for use

Some tractors can also be equipped with a front control system, with the option to control the front hydraulics outside the cabin. It is therefore important to always ask your dealer about the possibilities for your tractor.

Front double acting services lines

Lowering Speed Control Set

Lowering Speed Control Set

The Lowering Speed Control Set is available as an expansion to Zuidberg front linkages and offers the possibility to adjust the lowering speed of the front linkage as desired. The set has been designed to be connected directly to the multi-valve, but can also be used with a 12 mm pipe connection. If the multi-valve is in the single operating position, the oil flow can be adjusted as desired using the blue button, also changing the lowering speed of the front linkage.

Lowering Speed Control Set, the power of simplicity:

  • Easy to mount and use
  • Mounting possible on every Zuidberg front linkage, also on models already supplied.
  • Can also be mounted to a standard 12 mm pipe if there is no room at the multi-valve (hydraulic couplings are not supplied) 

IMG_4376.jpg

COOKIE INFORMATION

This website uses cookies, some of which are essential to the operation of our site.
More information about cookies > Accept Continue without cookies