Type Tracks

Various systems are available
Depending on the weight of your tractor or harvester and what it is used for, you can choose from a variety of track systems. Selfpropelled or towed harvesters and other agricultural vehicles can be fitted with track systems from Zuidberg Tracks. The track systems can also be custom-built.

C-frame

  • Can be quickly interchanged with standard wheels
  • Bogie-System as standard
  • Suitable for almost all harvesters with flat wheel flanges
  • Available with 2, 3 or 4 bogie wheels
  • Available with rubber tracks 61, 76 or 92 cm wide
  • Available with various attachment accessories such as adapters and spacers
  • Easy assembly (disassembly) with forklift cutouts in the track frame

 

C-frame

 


 

OC-frame

  • Can be quickly interchanged with standard wheels
  • Bogie-System as standard
  • Mounted directly to the flanged shaft or bar axle
  • Available with 3 bogie wheels
  • Available with rubber tracks 61, 76 or 92 cm wide
  • Available with various attachment accessories such as adapters and spacers
  • Easy assembly (disassembly) with forklift cutouts in the track frame

 

OC-frame

 

 


 

F-frame

  • Narrow construction reduces the total width of the machine
  • Bogie-System as standard
  • Can be fitted to tractors and harvesters with wheel motors
  • The mounting supports can remain fitted to the machine when the tracks are removed
  • Available with 2, 3 or 4 bogie wheels
  • Available with rubber tracks 61, 76 or 92 cm wide

 

F-frame

 


 

Reduced ground pressure means greater yield
The quality of the soil in which you are sowing, planting or setting therefore remains fully intact, which means that the growth of the crops is unaffected, improving both the quality and the quantity of yields.

Increased traction means increased confidence

Using the track systems increases the towing capacity of your machine, due to the fact that the contact surface on the ground is many times greater than it is with a normal pneumatic tyre. In addition, the self-cleaning ability of the rubber track means that the track does not clog up, so you can be sure you will achieve optimum traction. All four track units provide full traction with the ground, even when negotiating bends.

Easily interchangeable

Fitting and removal are simplicity itself. You can change the standard wheels on a tractor or machine for track units in no time at all, without any major modifications being required to the machine. The original utility value of the tractor or the machine is therefore retained.

Good structure for better crops

The quality of the soil is largely determined by the structure of the ground. The interconnectedness of soil particles is highly important for optimum crop growth. A good structure, for example, drains the water quickly during wet periods; in dry periods the capillary action in turn ensures there is enough water. A well-developed root system is beneficial for the quality and quantity of the crop and product.


 

Drive system

The Zuidberg track systems have a 'positive' drive system. The insides of the track systems are fitted with drive cams, which slot into the recesses in the drive wheel. The cams are used both for driving and steering. This reverse chain drive prevents the drive wheel from slipping. As less force is required to tension the tracks, tensioning systems and the frame can be relatively light. Finally, the rubber drive cams make the system low-noise.

 

 


 

 

Independent research proves it
Track systems have less impact on the ground than tyres.

View the impressive results of independent research by Alterra Wageningen UR and the Boerderij trade journal.

 

 

COOKIE INFORMATION

This website uses cookies, some of which are essential to the operation of our site.
More information about cookies > Accept Continue without cookies